Introduction To Three Links

Tees are pipe fittings and pipeline connectors. Also known as a pipe fitting tee or tee fitting, stainless steel equal diameter tee, tee joint, used in the main pipeline or branch pipe.
A tee has three openings, one inlet and two outlets; A type of chemical pipe fitting with two inlets and one outlet, consisting of T-shaped and Y-shaped fittings, with equal diameter nozzles and reducing diameter nozzles, used at the confluence of three identical or different pipelines. [1] The main function of a tee is to change the direction of the fluid
The representation method is as follows: for an equal diameter tee, for example, a "T3" (3 inches=DN80) tee represents an equal diameter tee with an outer diameter of 3 inches. For reducing tees, such as "T4 × four × 3.5 "(4 inches=DN100, 3.5 inches=DN90) represents a reducing tee with a diameter of four inches and a diameter of 3.5 inches. The material is generally 10 # 20 # A3 Q235A 20g 20G 16Mn ASTM A234 ASTM A105 ASTM A403, etc. The tee has an outer diameter range of 2.5" -60 "(2.5 inches=DN65, 60 inches=DN1500), a wall thickness of 3-60mm, ranging from 26" -60 "(26 inches=DN650, 60 inches=DN1500) For welding tees. Wall thickness 28-60mm. Pressure levels are Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, Sch100, Sch120, Sch140, Sch160, XXS.